Anbieter: AudioQuest

AudioQuest Husky Subwoofer Cable - 2.0 Meter - RCA to RCA - Single

248,92 €453,13 €45% OFF

5 in den letzten 5 Stunden verkauft

Menge

Noch 50,00 € bis zum kostenlosen Versand

Voraussichtliche Lieferzeit : 7. Oktober - 9. Oktober.

Garantiert sicher bezahlen

Beschreibung

What You Need to Know

What Is a Subwoofer Cable, and Why Use One Designed for the Job?

A subwoofer cable is an RCA interconnect — a single conductor with a shield around it and an RCA plug at each end. What makes a “subwoofer cable” different is what it has to put up with.

The signal it carries is the LFE channel — Low Frequency Effects, the dedicated low-frequency mono signal a home theater receiver, processor, or 2-channel preamp sends to a powered subwoofer. The run is usually long, and the path often passes close to AC and to the subwoofer’s own switch-mode power supply.

A cable engineered for that job uses heavier shielding and rugged connectors. Mechanically, the Husky can also be used as a regular RCA interconnect anywhere else in your system.

Where Does This Cable Belong in the AudioQuest Subwoofer Line?

The Husky sits at the top of AudioQuest’s dog-named subwoofer cable family — the line goes Black Lab, Greyhound, Irish Red, Boxer, Husky. The Husky is the only cable in the family to use Perfect-Surface Copper+, AudioQuest’s highest-purity copper grade, alongside Carbon-Based shielding and the patented 72V Dielectric-Bias System.

What’s Different About This One?

The Husky uses solid Perfect-Surface Copper+ conductors. PSC+ is AudioQuest’s highest-purity copper grade — the same surface-smoothing process used for Perfect-Surface Copper, applied to a more refined copper feedstock. Solid-core construction means a single piece of copper rather than many small strands, eliminating strand-to-strand interaction in the conductor.

The dielectric — the insulation surrounding the copper — is a polyethylene air-tube. The conductor sits suspended inside a tube of polyethylene, with air around most of its length. Air is the lowest-loss dielectric available short of vacuum.

The shield is the Carbon-Based Noise-Dissipation System (NDS) — a carbon-loaded layer that absorbs radio-frequency noise picked up by the cable instead of letting that noise drain back into the audio circuit’s ground. Critical for a long cable that passes close to AC and to the subwoofer’s own switch-mode power supply.

The RCA terminations are silver-plated and cold-welded. Cold-welding bonds the conductor to the connector under high pressure rather than soldering — no flux residue, no eutectic alloy in the signal path, and a mechanically stable joint that doesn’t relax over time.

Bill Low founded AudioQuest in 1980, and his “Do No Harm” philosophy still drives the line — the cable’s first job is to get out of the music’s way.

DBS Explained — The 72V Dielectric-Bias System

The Husky carries AudioQuest’s patented Dielectric-Bias System (DBS) — a small battery pack on the cable that applies a constant 72-volt electrostatic field to the dielectric (the insulation around the conductors). The idea is to polarize the dielectric so it doesn’t absorb and re-release small amounts of energy back into the signal as the audio current changes.

DBS is patented (US Patent #7,224,108). The battery pack has a test button with an LED on it, so you can confirm the battery is alive at any time — just press the button and look for the light. Battery life is rated for multiple years of normal service. AudioQuest specifies the exact rating on the Husky’s manufacturer page; verify the current rating there.

Where Does This Cable Belong in Your System?

The Husky is matched to reference and near-reference home theater systems and high-end 2.1 setups, where the chain around the subwoofer cable justifies AudioQuest’s most refined dog-named cable.

  • Good fit: reference home theater systems, high-end processor LFE-out feeding a reference-grade powered subwoofer, 2-channel preamp sub-out feeding a 2.1 subwoofer in a high-end chain.
  • Not ideal: entry or mid-tier systems where Boxer or Irish Red would be a better fit for the chain around the subwoofer.
  • Different configuration? If your subwoofer has two RCA inputs labeled L and R, you want the Husky Y-cable version instead.

Single Sub or Dual Subs?

Most home theater subwoofers have a single RCA input labeled “LFE.” A standard single-end subwoofer cable like this one connects directly. Some subs — particularly REL models and certain 2-channel-music-focused designs — have stereo L/R RCA inputs that internally sum to mono. For those, the Y-cable version is the natural choice.

Single-End or Y-Cable — Which One Do I Need?

The answer comes down to what’s on the back of your subwoofer. Most home theater subs have a single RCA input labeled “LFE” — single-end is what you want. Some subs (REL and certain 2-channel-music subwoofers) have stereo L/R RCA inputs that internally sum to mono — for those, the Y-cable version is the right choice.

Warranty: AudioQuest cables purchased from an authorized U.S. dealer carry a non-transferable, original-owner limited lifetime warranty. Audio Advisor is an authorized AudioQuest dealer.

Pairs Well With

  • Step down the line: The AudioQuest Boxer — PSC conductors with the same Carbon-Based NDS and 72V DBS.
  • Want to spend more? Husky is the top of the dog-named line. Customers looking to invest further sometimes use AudioQuest’s higher-end line-level analog interconnects pressed into LFE service. Give us a call to talk through options.
  • Different configuration: Husky Y-cable version.
  • Powered subwoofers: See our subwoofer collection.
  • AV receivers: Browse AV receivers.
  • Other AudioQuest cables: AudioQuest interconnects, speaker cables, and power cables.

Features & Specifications

Solid Perfect-Surface Copper+ conductors — AudioQuest’s highest-purity copper grade. Solid-core construction, no strand-to-strand interaction.

Polyethylene air-tube dielectric — Conductor suspended in air, lowest-loss dielectric short of vacuum.

Carbon-Based Noise-Dissipation System — Absorbs RF noise instead of letting it return to the audio circuit’s ground.

72V Dielectric-Bias System (DBS) — Patented (US Patent #7,224,108). On-cable battery pack with test button and LED.

Silver-plated cold-welded RCA terminations — Cold-welding eliminates flux and solder from the signal path.

Coaxial geometry — Single central conductor inside a continuous shield.

Direction-controlled conductors — Arrow on jacket marks preferred orientation (source → subwoofer).

Multiple lengths stocked at Audio Advisor

Limited lifetime warranty — Non-transferable, original-owner, authorized U.S. dealer.

Quick-Reference Specifications

Conductor Solid Perfect-Surface Copper+ (PSC+)
Geometry Coaxial
Dielectric Polyethylene Air-Tube
Dielectric-Bias System 72V DBS with test button (US Patent #7,224,108)
Connectors RCA — cold-welded, silver-plated
Configuration Single-end RCA-to-RCA
Direction Control Yes
Available Lengths Up to 12 feet
Warranty Limited lifetime, original owner, authorized U.S. dealer

Frequently Asked Questions

What does a subwoofer cable actually do?

Carries the LFE channel from receiver/processor/preamp to powered subwoofer. Engineered for long runs in noisy AV environments.

Can I use a regular RCA interconnect instead?

A well-built regular RCA will work mechanically. The Husky adds PSC+ conductor, Carbon-Based shielding, 72V DBS, silver-plated cold-welded RCAs, and long lengths specifically for subwoofer service.

What length do I need?

Measure the actual cable route, not straight-line distance. Add slack. When in doubt, go one length up.

What if my sub has two RCA inputs (L and R)?

You want the Y-cable version of the Husky.

How long does the DBS battery last?

Multiple years of normal service. Press the test button on the battery pack — if the LED lights, the battery is alive. The pack is replaceable.

How does this compare to the Boxer below it?

Same technologies — Carbon-Based NDS, 72V DBS, PE air-tube dielectric, silver-plated cold-welded RCAs. The Husky steps the conductor up from PSC to PSC+, AudioQuest’s highest-purity copper grade.

What’s the warranty?

Non-transferable, original-owner limited lifetime warranty. Audio Advisor is an authorized AudioQuest dealer.

Why Audio Advisor?

40+ Years of Expertise — Since 1981, we’ve helped over a million music lovers find the right gear.

60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it’s right for you.

Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.

Free Shipping — On orders over $49, delivered to your door.

Flexible Payment Options — Financing available so you can start listening now.

Visit our Learning Center for guides and expert advice.

14 Tage kostenlose Rückgabe1 Jahr Garantie

KundenserviceHilfe, wenn du sie brauchst

QualitätsgarantieDurch unser Versprechen abgesichert