AudioQuest Mackenzie Interconnect Cable - 1.5 Meter - RCA to RCA - Single

Mackenzie Is the Award-Winning Middle of AudioQuest's Rivers Series

AudioQuest's Mackenzie sits third in the Rivers series, above Red River. It is a two-cable design, one lead per channel. A carbon shield, a separate ground wire and Hanging-Silver plugs make it the first Rivers cable with upper-range parts.

Solid Perfect-Surface Copper+, Direction-Controlled

The wires are solid Perfect-Surface Copper+, AudioQuest's highest grade of copper, which it calls PSC+. The wire is drawn with an ultra-smooth surface, and AudioQuest says this cuts the distortion caused by grain boundaries. Solid wire also removes strand interaction.

The wire is also direction-controlled. AudioQuest says drawn wire has a grain with a direction. It listens to every batch, picks the direction, and marks the jacket with arrows. Point the arrows at the amplifier and noise drains where AudioQuest intends.

Hard-Cell Foam and Triple-Balanced Geometry

The insulation is Hard-Cell Foam, injected with nitrogen to form air pockets. AudioQuest says the stiff foam holds the signal pair in a fixed geometry. Air stores almost no signal energy, so little is released late as smear.

The layout is what AudioQuest calls Triple-Balanced. A third wire carries the ground on its own. The shield never has to double as a signal path. AudioQuest says both signal legs then travel equally clean routes.

The Hanging-Silver Purple Copper Plug, Explained

Mackenzie ends in a Hanging-Silver plug. The body is pure Purple Copper. The parts hang in the plating bath instead of tumbling, which AudioQuest says gives a more even coat of silver. The plug is cold welded to the wire. There is no solder in the path.

Around the cable is a three-layer shield with a carbon layer. AudioQuest calls it Carbon-Based 3-Layer Noise-Dissipation. An ordinary shield drains radio noise into the ground, and AudioQuest says that dirties the reference the signal is measured against. The carbon layers soak up the noise first.

What Reviewers Are Saying

hi-fi+ named Mackenzie its 2026 award winner among cables under £1,000 on March 19, 2026. Reviewer Eric van Spelde had found it made "a night-and-day difference" in his modest system.

He heard "a strong, palpable centre image against a dark, solid background" and "a bigger soundstage with much better separation and strong dynamics." The review ran in June 2025.

Who Is This Interconnect Best For?

• You want a quiet background — hi-fi+ heard a dark, solid background, so voices stand out from silence
• Your left and right jacks sit far apart — Mackenzie is two separate cables, so mono amplifiers and wide racks are no problem
• Your sources sit near power supplies — the carbon shield and a separate ground wire drain noise, so the shelf stays quiet
• You want silver at the contact — the plugs are Hanging-Silver over pure Purple Copper, so the last inch is silver
• Your components both offer XLR — Mackenzie is single-ended RCA. If both components have balanced jacks, choose the AudioQuest Mackenzie XLR instead. Or call us

How Does It Connect to Your System?

Run Mackenzie from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Point the arrows on the jacket toward the amplifier. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable.

Then listen. Other and longer lengths available. Call for prices.

Pairs Well With

An interconnect is one link in the chain. It usually joins these categories.

• Integrated Amplifiers — the usual input end
• Digital-to-Analog Converters — DAC output to amplifier
• Phono Preamplifiers — phono stage to line input
• Speaker Cables — the last link to the speakers

Frequently Asked Questions

What is a Hanging-Silver plug?

AudioQuest's plug with silver over a body of pure Purple Copper. The parts hang in the plating bath instead of tumbling. AudioQuest says the result is a more even coat of silver.

What does Triple-Balanced mean?

The cable has three wires: positive, negative and a separate ground. AudioQuest says this keeps the shield out of the signal path, so both signal legs travel equally clean routes.

Which way do the arrows point?

Toward the component that receives the signal, normally the amplifier or preamp. AudioQuest sets the direction of the wire and says the arrows let noise drain the right way.

What is the carbon three-layer shield?

AudioQuest's Carbon-Based 3-Layer Noise-Dissipation. It soaks up radio noise before the noise reaches the layer tied to ground. AudioQuest says this keeps the ground reference clean.

What warranty does AudioQuest give?

A limited lifetime warranty to the original owner, for cables bought from an authorized US dealer. AudioQuest will repair or replace a defective cable that has not been abused. Keep your proof of purchase.

Is there a step up?

AudioQuest Yukon is the next rung. It keeps the Rivers layout and the Hanging-Silver plugs and moves the wires into Polyethylene Air-Tubes.

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about interconnects, solid-core cables, or RCA versus XLR? Visit our Learning Center for guides, tips, and expert advice.